Investigations of ash fouling with cattle wastes as reburn fuel in a small-scale boiler burner under transient conditions

Fouling behavior under reburn conditions was investigated with cattle wastes (termed as feedlot biomass [FB]) and coal as reburn fuels under a transient condition and short-time operation. A small-scale (30 kW or 100,000 Btu/hr) boiler burner research facility was used for the reburn experiments. The fuels considered for these experiments were natural gas (NG) for the ashless case, pure coal, pure FB, and blends of coal and FB. Two parameters that were used to characterize the ash "fouling" were (1) the overall heat-transfer coefficient (OHTC) when burning NG and solid fuels as reburn fuels, and (2) the combustible loss through ash deposited on the surfaces of heat exchanger tubes and the bottom ash in the ash port. A new methodology is presented for determining ash-fouling behavior under transient conditions. Results on the OHTCs for solid reburn fuels are compared with the OHTCs for NG. It was found that the growth of the layer of ash depositions over longer periods typically lowers OHTC, and the increased concentration of ash in gas phase promotes radiation in high-temperature zones during initial periods while decreasing the heat transfer in low-temperature zones. The ash analyses indicated that the bottom ash in the ash port contained a smaller percentage of combustibles with a higher FB percentage in the fuels, indicating better performance compared with coal because small particles in FB burn faster and the FB has higher volatile matter on a dry ash-free basis promoting more burn out.     

Complexing capacity of natural waters carrying a great amount of suspended matter

The cadmium binding properties of waters of the superior section of the Rio de la Plata estuarine were determined over a three-year period. Samples were collected at different hydrodynamic conditions. The complexing capacity was determined by square wave anodic stripping voltammetry (SWASV). Titration curve data were analyzed using a multivariable regression. Suspended particulate matter (SPM) was identified by XR diffraction and FTIR. These analyses showed that SPM principal components are clays (illite, montmorillonite and chlorite). The study was applied to the untreated, filtered and centrifuged fractions of each sample at the pH of the natural waters and at pH 1. The results show that the contribution of dissolved organic matter to the complexing capacity is negligible when compared with SPM. At natural pH, the complexing capacity of filtered and untreated fractions can be described by considering two kinds of binding sites. The associated conditional binding constants are independent of the concentration of suspended matter. Their average logarithms are ca. 6.5 and ca. 4.4. The total concentration of binding sites (S(T)) is in microM range, which is about three orders of magnitude higher than that reported for most of the studied estuaries. This difference is explained on the basis of the great amount of SPM. Hydrodynamic conditions produce variations in the concentration and composition of the SPM. At pH 1 samples still exhibit an important complexing capacity with only one binding site with log K(cond) ca. 5.4. These differences could be attributed to superficial modifications that take place at very low pH.     

Treibhausgasemissionen zukünftiger Erdgasbereitstellung für Deutschland

Ohne Zusammenfassung Original erschienen in UWSF – Z Umweltchem ?kotox 20(2):133–144 (2008) DOI: Herausgeber: Martin Pehnt und Eckard Helmers     

CHemical and Biological Assessment of an Urban, Estuarine marsh in Northeastern New Jersey USA

Oritani Marsh in the Hackensack Meadowlands of urbanized northeastern New Jersey USA was assessed in 2000 for vegetation, soil/sediment chemistry, abundance/diversity of benthic invertebrates, and bird and mammal usage. Vegetatively, both marsh and uplands are dominated by tall, dense Phragmites australis. Small patches (less than 2 hectares total) dominated by Spartina spp. were found at the lowest elevations. Soil/sediment cores were sliced into 5 intervals and analyzed for metals, pesticides and volatile/semivolatile organic compounds. Thirteen locations had at least one chemical above Long et al.’s [Environmental Management, 19, 1995, 81--97] “Effects Range-Median” (ERM). Seven metals and nine organics exceeded ERM in at least one sample, with mercury showing the most exceedances. The surface 15 cm interval was generally more contaminated with metals than the 15 to 30 cm interval; the reverse was true for semivolatile organic compounds. Twenty taxa of benthic macroinvertebrates were collected, with each location producing from 1 to 9 taxa. Abundance ranged from 11 to 3,889 individuals/m². Number of taxa was moderately (r ² between 0.40 and 0.70) negatively correlated with zinc, beryllium, nickel and arsenic concentrations; no other chemical’s r ² was above 0.25. Diversity was moderately negatively correlated with arsenic and beryllium. These correlations were unexpected: zinc, beryllium, nickel and arsenic were not the chemicals found at the highest concentrations relative to benchmarks. Number of taxa, abundance and diversity were moderately (negatively) correlated with elevation; organic carbon was moderately (positively) correlated with abundance. All other correlations were weak (r ² < 0.35). Live traps captured only one mammal species, the meadow jumping mouse. Bird observations revealed 39 species, dominated by a few common species.     

Catalyst deterioration over the lifetime of small utility engines

In this paper, the deterioration of catalysts in small, four-stroke, spark-ignition engines is described. The laboratory testing performed followed a proven test method that mimics the lifetime of a small air-cooled utility engine operating under normal field conditions. The engines used were single-cylinder, 6.5-hp, side-valve engines. These engines have a nominal 125-hr lifetime. The effectiveness of the catalysts was determined by testing exhaust emissions before and after the catalyst to determine the catalyst's efficiency. This was done several times during the lifetime of the engines to determine the deterioration in the performance of the catalysts at lowering pollutant emissions. Additional testing was performed on the catalysts to determine wear patterns, contamination, and recoverable activity. The results indicate that considerable catalyst deterioration is occurring over the lifetime of the engine. The results reveal that soot buildup, poisons, and active surface loss appear to be the contributing factors to the deterioration. These results were determined after analyzing the exhaust emissions data, scanning electron microscope results analysis, and the impact of regeneration attempts. An ANOVA statistical analysis was performed, and it was determined that the emissions are also impacted, to some degree, by time and the engine itself.